Art Clay. Nozzle for art clay syringe. 18 guage. Green nozzle. Sold per individual nozzle.

Art Clay. Nozzle for art clay syringe. 20 guage. Pink nozzle. Sold per individual nozzle.

Art Clay. Nozzle for art clay syringe. 22 guage. Blue nozzle. Sold per individual nozzle.

Burnishers are used to polish a fired and sanded object. You use the polished side (not the tip) to rub the surface. This brings out the shine and also hardens the surface.

Approximate weight of this product is 230 gram. What to do with it: Core cork clay is what you use if you want a hollow object. The material can easily be shaped i

Approximate size is 70x120x10mm.?ß Used primarily in kilns as support (should be fired first alone when used in kilns). Often also used with gas torch as support. Make sure that there is a brick or something non-flamable underneath!

Size of board is 100x150x10mm. Used primarily in kilns as support (should be fired first alone when used in kilns). Often also used with gas torch as support. Make sure that there is a brick or something non-flamable underneath!

Size of sheets is 150x150mm. Used primarily in kilns as support.

Files for arct clay silver come in two grades, fine and medium. You should use both of these, not just one. Start with using the medium first and once all the work has been done you use the fine to remove any deep marks the medium file has made. After that, you would move to sand paper. It is suggested in the literature that you should use 600 and 1200 grid paper. However, I find that that is way...

Files for arct clay silver come in two grades, fine and medium. You should use both of these, not just one. Start with using the medium first and once all the work has been done you use the fine to remove any deep marks the medium file has made. After that, you would move to sand paper. It is suggested in the literature that you should use 600 and 1200 grid paper. However, I find that that is way...

For use with art clay silver.

How to use: Boil some water and place a strip of this stuff in it to soften it. You can than mold it around an object and, after it has cooled down, remove the object to get a negative copy of it. Use paste or clay and than, after drying, remove the resin and fire away. I have noted that although the instructions say that the water should be 80 degrees, it is better to have it boiling hot or it will be pretty tough to mold it.

Not only is it the most convenient, easiest way to use liver of sulfur, but amazingly it does not degrade in light and air the way the lump form does. Dry liver of sulfur is very unstable and goes dead in a few hours if left uncovered or exposed to light. Liver of sulfur in liquid form is even more unstable. Patina Gel is stable, so even if the lid has been left off, it will remain fresh. You’ll...

How to use: Plastic strips give a uniform thickness when used in combination with the plastic roller. For shorter pieces you can also use playing cards.